DISSIMILAR WELDING OF ALUMINUM ALLOYS 2024 T351 AND 6082 T6 BY TIG PROCESS

dc.citation.epage126
dc.citation.spage117
dc.citation.volume12
dc.contributor.authorMilčić, Dragan
dc.contributor.authorMilčić, Miodrag
dc.contributor.authorVuherer, Tomaž
dc.contributor.authorĐurić, Aleksija
dc.contributor.authorMitić, Dragan
dc.contributor.authorRadovanović, Andreja
dc.date.accessioned2024-05-29T09:21:21Z
dc.date.available2024-05-29T09:21:21Z
dc.date.issued2023
dc.description.abstractThe aim of this work is to study the metallurgical and mechanical properties of dissimilar assemblies of 2024 T351 and 6082 T6 aluminum alloy by the TIG process. Aluminum alloy 6082 T6 is well weldable by classical fusion welding processes (MIG and TIG), while aluminum alloy 2024-T351 is almost non-weldable. Base metals were sheets with a thickness of 8 mm. The assembly of the plates was carried out by filler wire of an aluminum alloy type 4043A (AlSi5) with 2 mm of diameter. For the welding of these two Al alloys by TIG welding process in argon a shielding gas. The microstructural evolution across the welded joint dissimilar AA6082-T6 to AA2024-T351 aluminum alloy was characterized using optical and scanning electron microscopy (SEM). The hardness welded joint is the smallest in the melted area and the biggest on the side of 2024 alloy in HAZ. The fracture surface section of the tensile specimen is in the HAZ zone on the BM side - 6082-T6. The tensile strength of the welded joint is 166 MPa compared to 310 MPa for alloy 6082-T6 which is a weaker welded joint material, i.e. the reduction is about two times.
dc.identifier.urihttps://vaseljena.ues.rs.ba/handle/123456789/1214
dc.language.isoen
dc.publisherSveučilište u Slavonskom Brodu, Strojarski fakultet, Društvo za tehniku zavarivanja Slavonski Brod
dc.sourceMeđunarodno znanstveno-stručno savjetovanje SBZ 2023 „STROJARSKE TEHNOLOGIJE U IZRADI ZAVARENIH KONSTRUKCIJA I PROIZVODA, SBZ 2023.“
dc.subject2024 and 6082 aluminum alloy, TIG welding, Microstructure, Mechanical properties
dc.titleDISSIMILAR WELDING OF ALUMINUM ALLOYS 2024 T351 AND 6082 T6 BY TIG PROCESS
dc.typeArticle
Датотеке
Оригинални завежљај
Сада се приказује 1 - 1 од 1
Учитавање...
Сличица
Име:
SBZ_2023_paper_117-126 (1).pdf
Величина:
1.17 MB
Формат:
Adobe Portable Document Format
Опис:
Свежањ лиценце
Сада се приказује 1 - 1 од 1
Учитавање...
Сличица
Име:
license.txt
Величина:
1.71 KB
Формат:
Item-specific license agreed to upon submission
Опис: